Swing sink clamping elements
Swing sink clamping elements 4.2150 (figure 1)
double acting with 2x45° swing angle
The piston is guided by a control bolt so that during the stroke movement a rotation of 45° is effected. Monitoring of the unclamping, change-over and clamping positions by inductive proximity switches.
The swing mechanism is protected by a spring-loaded overload protection and equipped with emergency stop. Tie rod, piston and swing mechanism are hardened.
Applications
- integrated in press rams
- integrated in press beds
- in machine tools and equipment
- when the available space is limited
- at environmental temperatures up to max. 70°C
Special features
- ideal force transmission
- compact design
- clamping force from 60 kN up to 164 kN
- high operating safety by position monitoring, emergency stop and overload protection
- suitable for large clamping edge tolerances (±1.5 mm)
- no interfering edges when inserting the dies
- optimum use of ram and bed surfaces
- clamping at difficultly accessible points
DOWNLOAD